Sending A Test E-Mail - SMA NET Piggy-Back Technical Description

Setting Parameters on the Sunny Boy Control

9.3 Sending a Test E-mail

Once all the settings are complete you can send a test e-mail. To do so, select "FI_Function" channel
and "Kanalwert" "Send Testmail" in the parameter list. If you have performed the configuration
correctly, you will soon receive an e-mail at the specified address, as well as at the addresses you
specified as a copy. You can monitor the status of the e-mail transmission and any error codes that
may occur by observing the "FI-Status" and "FI-Code" channels in the online window of the Sunny
Data Control.
To send a test e-mail to Sunny Portal, select "Send SPTestmail".
Sending a test report can be useful in checking the settings.
Sending Test Report
[ TEST-REPORT
‡Start
[ TEST-REPORT
‡FI-State...
...OK
If you are unable to send the test report, the following will be displayed:
Error Code Display
[ TEST-REPORT
‡FI-State...
...Error
[5004]
The meaning of the error code is described in the appendix.
40 NETPB-TEN081708
]
Sending a test e-mail
]
]
For information on the error cause and the meaning of
the code, see Section 10.3
SMA Solar Technology AG
Technical Description