E-Mail Recipient Of Your Choice - SMA NET Piggy-Back Technical Description

Parameter List
FI_SPMail
FI_SPMail FROM
FI_SPMail TO
FI_SPMail TO(2)

7.2.3 E-mail Recipient of your Choice

FI_EMAIL
FI_EMAIL FROM
SMA default setting
You normally do not have to change the default "seriesnumber@SMA.de" setting for e-
mail transmission.
30 NETPB-TEN081708
Here you can specify how often you want data to be sent to the
Sunny Portal. All recorded channels are sent in the SPMail.
Formula for calculating the e-mail size since the recording is limited
by the size of the e-mail.
no report
hourly report Report at the top of the next hour
daily report Report once everyday (see FI_Send at)
Enter your login here, which is the e-mail address you registered in
Sunny Portal. If you fail to do so, the data of your system will not be
allocated in Sunny Portal and will be deleted.
Do not change the e-mail address entered here (datacenter@sunny-
portal.de).
Second e-mail address for your own use
This parameter is the central switch for activating or deactivating
e-mail transmission.
activated E-mail transmission possible
deactivated E-mail transmission blocked
The FI_EMAIL FROM parameter contains the e-mail address that is
transmitted to the mail server as the message sender. Make sure the
address is entered as sender@domainname. The domain name
must refer to an existing domain.
Example of a correct entry:
Example of an incorrect entry:
SMA Solar Technology AG
PV-system@SMA.de
PV-system
Technical Description