Configuration For E-Mail Transmission; E-Mail Recipient Of Your Choice; Data Transmission To Sunny Portal; Calculating The Data Volume For Sunny Portal - SMA NET Piggy-Back Technical Description

Configuration for E-mail Transmission

6 Configuration for E-mail Transmission
This section will show you how to set the appropriate configuration depending on whether you want
to send data to an e-mail recipient of your choice or directly to the Sunny Portal.
Required Information
The information that is required to send e-mails to an "E-mail recipient of your choice" or
the "Sunny Portal" is listed below. You can also perform additional settings as specified
in Section 7.

6.1 E-mail Recipient of your Choice

• FI_EMAIL:
- Set this parameter to <activated>.
• FI_EMAIL TO:
- Please enter the e-mail address of the recipient to whom the e-mail is to be sent here.

6.2 Data Transmission to Sunny Portal

• FI_SPMail:
- Set the parameter to hours or daily report.
• FI_SPMail from:
- Here you must enter your login, which is the same as the e-mail address you registered in
Sunny Portal.
• FI_SPMail to:
- Do not change the e-mail address entered here (datacenter@sunny-portal.de).
• FI_Plant Name1
- Used to identify your system.

6.2.1 Calculating the Data Volume for Sunny Portal

All the recorded channels of the Sunny Boy Control / Sunny Boy Control Plus with Sunny Portal
Mail (SPMail) will be sent. Since the amount of data in the e-mail is limited, the data volume must
be adjusted to match the recorded channels and measuring interval.
The formulas for calculating the number of channels and the measuring interval for the hourly and
daily reports are described below.
24 NETPB-TEN081708
SMA Solar Technology AG
Technical Description