Data Transmission To Sunny Portal - SMA NET Piggy-Back Technical Description

SMA Solar Technology AG
FI_Function
FI_Plant-Info
FI_Plant Name1
FI_Plant Name2
FI_Report-Warnings
FI_Report-Error
FI_Send at

7.2.2 Data Transmission to Sunny Portal

Technical Description
- - - Default setting
SET NET Default Resets all NET / eMail settings
Werkseinstell. Returns all values to their factory settings
System Info reports the yield of each Sunny Boy at the end of the
day
no report
daily report System Info once everyday (see FI_Send at)
The name of your PV system. The system name is essential for
identifying your system in the Sunny Portal.
Example: SBCO1234567890
2nd line of the name of your PV system.
This report is sent when a warning is issued. A warning usually
refers to a temporary failure.
no report
hourly report Report at the top of the next hour
daily report Report once everyday (see FI_Send at)
This report is sent when an error occurs. An error refers to a failure
that may affect the yield of the PV system.
no report
hourly report Report at the top of the next hour
daily report Report once everyday (see FI_Send at)
Sunny Boy Control assumes it's the end of the day if there is no
contact to the PV system for 30 minutes or longer. The earliest time
when this check is performed is 3:00 PM. You can, however,
increase this time to 11:00 PM. Changing the hour setting is
generally only useful if you are using an analog phone line for
regular telephone calls during the day (e.g., during office hours).
This prevents a phone conversation from being interrupted when an
e-mail is sent.
Parameter List
NETPB-TEN081708 29