Main Screens Map And Main Mhg Reheat Screens - AAON MHGRV-X Field Technical Manual

Main Screens Map
Refer to the following map when navigating through the LCD
Main Screens. The first screen is an initialization screen. To
scroll through the rest of the screens, press the
Press to scroll through MHG REHEAT Screens.
Press to go to STATUS Screens.
Press to scroll through STATUS Screens.
Press to go to ALARMS Screens.
Press to scroll through ALARMS Screens.
Press to go to SETPOINTS Screens.
SETPOINT
Press to scroll through SETPOINT Screens.
Press to go to FORCE VALVE Screens.
Press to scroll through FORCE VALVES Screens.
MHGRV-X Field Technical Guide

Main Screens Map and Main MHG REHEAT Screens

<MENU>
INIT
VALVE
MHG
REHEAT
STATUS
SCREEN
ALARMS
FORCE
VALVES
Main MHG REHEAT Screens
Refer to the following map when navigating through the Main
Screens. From the MHG REHEAT Screen, press
button. scroll through the screens.
In Stand-Alone Mode, the screen will display S/A MODE or
S/A MODE LOCKED.
In Communications Mode, the screen will display COMM MODE
and the items below will scroll through the screen:
1. Number of good packets being received. This will
roll over after 9999. Example: +XXXX
2. Number of checksum errors. This will stop at 9999.
Example: C-XXXX
3. Number of packet length errors. This will stop at
9999 until power is cycled. Example: P-XXXX
CURRENT SOFTWARE VERSION
LCD SCREENS
MHG
REHEAT
S/A MODE,
SA MODE LOCKED
or COMM MODE
SOFTWARE
VER 3.06
ADDRESS
#
CURRENT BOARD ADDRESS
to
<ENTER>
13