Advertisement
USER'S GUIDE
FONT Switch
PRIMARY FONT
4–44
Pressing the FONT switch allows you to select fonts and
symbol/character sets.
Notes
When you use the FONT switch, note the following:
The FONT switch is effective in the HP LaserJet 4, EPSON FX-
850, and IBM Proprinter XL modes. However the settings are
subject to the current emulation mode.
If the application software supports font and symbol/character set
selection, you do not need to set them with the FONT switch. The
software or command setting overrides the switch setting.
If you want to use optional fonts other than the printer's resident
fonts, be sure to install a font cartridge/card that has your desired
fonts. The printer automatically selects the font that has exactly
the same or similar characteristics as those you set through the
software or with a command. If the installed font cartridge/card
happens to have a font of similar characteristics, the printer will
print with an unexpected font.
You can store the fonts you require on a flash memory card or a
HDD card only in the HP LaserJet 4 mode when one is installed.
See "CARD OPERATION."
Setting the Font and Symbol Set in the HP LaserJet 4 Mode
When the HP LaserJet 4 emulation mode has been selected, the font
and symbol set can be set separately as the primary or secondary font.
The display shows the following setting menus:
SELECT FONT
SYMBOL SET
TABLE PRINT
exit
p
Set the primary font.
p
Set the symbol set.
p
Print the code table.
Exit
Advertisement
