Advertisement
FEEDER Switch
You can select the feeder, manual feed mode, or MP tray settings with
the FEEDER switch, and also select the duplex printing mode if the
optional duplex printing unit is installed.
You can check the current feeder and the duplex mode on the display.
When tray 1 has been selected, the display may look as follows:
When the multi-purpose tray and the duplex printing mode have been
selected, the display may look as follows:
The black square
When you want to change settings with the FEEDER switch, hold
down the SHIFT switch and press the FEEDER switch. You will then
enter the setting mode where you change the feeder, manual feed
mode, etc.
FEEDER
To select the feeder, follow these steps:
1. Press the SEL switch to set the printer off-line.
2. Hold down the SHIFT switch and press the FEEDER switch.
When you enter the setting mode, the display first shows the
current feeder setting with the asterisk.
Display Message
FEEDER=AUTO
MP FIRST=OFF
MANUAL FEED=OFF
MP TRAY SETTING
MEDIA TYPE
DUPLEX MODE
00 READY 001P T1
00 READY 001P MP
indicates that duplex printing mode is selected.
CHAPTER 4 CONTROL PANEL
Feeder
Select a feeder or auto paper feed.
Turns MP first on or off.
Turns manual feed on or off.
MP tray settings
Select print media
Selects duplex printing mode (only
with the duplex option installed.)
4–65
Advertisement
