Advertisement
USER'S GUIDE
Appendix–62
Bar Code, Expanded Character, Line Block Drawing & Box
Drawing Offset in X-axis
n = "xnnn" or "Xnnn"
This parameter specifies the offset from the left margin in
the "u"- or "U"-specified unit.
Bar Code & Expanded Character Offset in Y-axis
n = "ynnn" or "Ynnn"
This parameter specifies the downward offset from the
current print position in the "u"- or "U"-specified unit.
Bar Code, Expanded Character, Line Block Drawing & Box
Drawing Height
n = "hnnn", "Hnnn", "dnnn", or "Dnnn"
(1)
EAN13, EAN8, UPC-A, ISBN (EAN13, EAN8, UPC-
A),
ISBN (UPC-E):
(2)
UPC-E:
(3)
Others:
Expanded characters
(default)
Line Block Drawing & Box Drawing
This parameter specifies the height of bar codes or
expanded characters as above. It can take the prefix "h",
"H", "d", or "D". The height of bar codes is specified in the
"u"- or "U"-specified unit. Note that the default setting of
the bar code height (12 mm, 18 mm or 22 mm) is subject to
the bar code mode selected by "t" or "T".
Expanded Character Width, Line Block Drawing & Box
Drawing
n = "wnnn" or "Wnnn"
Expanded character
Line Block Drawing & Box Drawing
This parameter specifies the width of expanded characters
as above.
22 mm
18 mm
12 mm
2.2 mm
1 dot
1.2 mm
1 dot
Advertisement
