Advertisement
5. Set "Time Out" with the
TIME OUT= 5s
This time out is the duration during which the printer will not
allow an automatic emulation change. You can set it to 1 second
from 99 seconds: the factory setting is 5 seconds.
6. Press the SET switch.
The next sub-item "EPSON/IBM" appears on the display.
EPSON/IBM=EPSON*
7. Select EPSON or IBM with the
Since the printer cannot distinguish between the EPSON and IBM
emulation modes, you need to select the EPSON or IBM emulation
even in the AUTO mode.
When the printer receives data from the computer, it automatically
selects the emulation mode in any of the following combinations:
EPSON/IBM Priority
Auto Selection Mode HP LaserJet 4
8. Press the SET switch.
The next sub-item "KEEP PCL" appears on the display.
KEEP PCL=OFF
This function is for permanent macros and fonts downloaded in the
HP LaserJet 4 mode.
9. Turn on or off the "KEEP PCL" function with the
When you do not need to use the permanent macros and fonts in
the HP LaserJet 4 mode, turn this function off. When you use
them, you can turn it on.
or
switch.
*
or
switch.
EPSON IBM
HP LaserJet 4
HP-GL
HP-GL
EPSON FX-850
IBM Proprinter XL
CHAPTER 4 CONTROL PANEL
or
switch.
4–61
Advertisement
