Reset Switch - Brother HL-960 Series User Manual

RESET Switch

You can reset the printer with the RESET switch. The print data that
the printer has already received from the computer is cleared and the
printer settings are restored to the user settings or factory settings.
The temporary download fonts and macro settings you set with
commands in the HP LaserJet 4 mode are also cleared.
When you want to reset the printer, hold down the SHIFT switch and
press the RESET switch. You then enter the reset mode where you
reset the printer.
To reset the printer, follow these steps:
1. Press the SEL switch to set the printer off-line.
2. Hold down the SHIFT switch and press the RESET switch.
When you enter the reset mode, the display shows the first reset
mode item.
3. Press the
the display.
RESET PRINTER
or switch until the desired reset mode appears on
Display Message
RESET PRINTER
RESET SETTING 1
RESET SETTING 2
FACTORY SETTINGS
exit
CHAPTER 4 CONTROL PANEL
Reset Mode
Resets the printer and restores all
printer settings–including command
settings–to settings you have
previously made with the panel
switches.
Resets the printer and restores all
printer settings–including command
settings–to the selected number (1-2)
of user settings you have previously
made with the MODE switch.
Resets the printer and restores all
printer settings–including command
settings–to the factory settings. See
"List of Factory Settings."
Exits from the reset mode. The
printer is not reset.
4–73