Advertisement
You can turn on or off the auto form feed in this mode menu as
follows:
Display Message
AUTO FF=OFF
AUTO FF=ON
When you turn on the auto form feed as above, you need to set the
wait time in the following sub-setting menu:
Display Message
WAIT TIME= 1s
.
.
WAIT TIME=99s
Form Feed Suppress
You can turn on or off the form feed suppress function in this mode
menu as follows:
Display Message
FF SUPPRESS=OFF
FF SUPPRESS=ON
If pages contain no print data, the printer would normally print blank
pages. When you turn this function on, you can suppress printing
blank pages.
When the printer is used in the network environment, it may print a
blank page at the end of each print job. When you turn on this
function, the printer does not print blank pages.
Auto Form Feed
Turn off the auto form feed. You need to
press the FORM FEED switch every time
data remains in the printer's memory.
(Factory setting)
Turn on the auto form feed. Every time data
remains in the printer's memory, the auto
form feed takes place after the wait time set
as below.
Wait Time
Set the wait time for the auto form feed.
The printer automatically prints out the
remaining data after the set wait time.
The wait time can be set from 1 to 99
seconds.
Form Feed Suppress
Turn off the form feed suppress function.
(Factory setting)
Turn on the form feed suppress function.
CHAPTER 4 CONTROL PANEL
4–39
Advertisement
