Network Printing From Windows Basic Tcp/Ip Peer-To-Peer Printing; Overview; For Windows 2000/Xp Users; Configuring The Standard Tcp/Ip Port - Brother HL-5270DN Network User's Manual

Multi-protocol on-board ethernet print server and wireless (ieee 802.11b/g) ethernet print server
Hide thumbs Also See for HL-5270DN:
Table of Contents

Advertisement

4
Network printing from Windows
basic TCP/IP Peer-to-Peer printing

Overview

®
If you are a Windows
user and want to print using the TCP/IP protocol in a Peer-to-Peer environment, please
follow the instructions in this chapter. This chapter explains how to install the network software and the printer
driver which you will need to be able to print using your network printer.
Note
You must configure the IP address on your printer before you proceed with this chapter. If you need
to configure the IP address, see Chapter 2 first.
Verify the host computer and print server are either on the same subnet, or that the router is properly
configured to pass data between the two devices.
The default password for Brother print servers is access.
For Windows
®
®
By default, Windows
2000/XP systems install the necessary print software to enable you to print. This
section describes the most commonly used configuration, Standard TCP/IP Port printing. Windows
users can also print via the Internet using the IPP protocol. For more information, see Internet printing for
®
Windows
on page 6-1.
If you have already installed the printer driver, jump to Printer driver already installed on page 4-2.

Configuring the standard TCP/IP port

Printer driver not yet installed

1
®
For Windows
XP: Go to the Start button and select Printers and Faxes.
®
For Windows
2000: Go to the Start button, select Settings and then Printers.
2
®
For Windows
XP: Click Add a printer to get the Add Printer Wizard.
®
For Windows
2000: Double click the Add Printer icon to get the Add Printer Wizard.
3
Click Next when you see the Welcome to the Add Printer Wizard screen.
4
Select Local printer and deselect the Automatically detect and install my Plug and Play printer
option.
5
Click Next.
6
You must now select the correct Network printing port. Select Create a new port and select Standard
TCP/IP Port port from the pull-down window.
2000/XP users
®
:
®
2000/XP
4
4 - 1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hl-5280dw

Table of Contents