Control panel NETWORK menu table and default factory settings
(HL-5270DN)
See (HL-5280DW) on page 8-3 for the HL-5280DW NETWORK menu table.
Level one
Level two
NETWORK
TCP/IP
NETBIOS/IP
ENET
FACTORY RESET
1. The factory setting for IP Address may be changed by the APIPA setting.
2. The factory setting for Subnet Mask may be changed by the APIPA setting.
Level three
Options 1
TCP/IP ENABLE
=ON, OFF
IP ADDRESS=
[000-255].[000-255].[000-255].
[000-255]
SUBNET MASK=
[000-255].[000-255].[000-255].
[000-255]
GATEWAY=
[000-255].[000-255].[000-255].
[000-255]
IP BOOT TRIES
=0 to 32767
IP METHOD
=AUTO, STATIC, RARP,
BOOTP, DHCP
APIPA
=ON, OFF
IPV6
=ON, OFF
-
=ON, OFF
-
=AUTO, 10B-HD, 10B-FD,
100B-HD, 100B-FD
OK?
-
Control panel setup
Factory settings
=ON
[169].[254].[001-254].[000-255]
2
255.255.0.0
0.0.0.0
=3
=AUTO
=ON
=OFF
=ON
=AUTO
-
8
1
8 - 2