Using The Control Panel Network Menu To Configure Your Wireless Network Printer (In Infrastructure Mode) - Brother HL-5270DN Network User's Manual

Configuring your wireless network printer (HL-5280DW only)
Using the control panel NETWORK menu to configure your wireless network
printer (in infrastructure mode)
You can configure your print server by using the NETWORK menu on the printer's control panel. See to the
steps below for further information.
1
Press any of the Menu buttons (+, -, Set or Back) to take the printer off-line.
INFORMATION
2
Press the + button or the - button to move forward or backward through the menus until NETWORK is
displayed.
NETWORK
3
Press Set.
Press the + button or the - button to select WLAN.
WLAN
4
Press Set.
Press the + button or the - button to select WIRELESS.
WIRELESS
5
Press Set.
Press the + button twice to select COMM.MODE.
COMM.MODE
6
Press Set.
Press the + button or the - button to select INFRASTRUCTURE.
INFRASTRUCTURE
3
3 - 6