Netbios/Ip; Set Default - Brother HL-5270DN Network User's Manual

Multi-protocol on-board ethernet print server and wireless (ieee 802.11b/g) ethernet print server

Hide thumbs Also See for HL-5270DN:

Table of Contents

■

PASSWORD

If you have selected LEAP for an authentication mode, you will need to enter a password that is 32

characters or less in length.

■

APPLY

In order to make your wireless settings effective, you must select the APPLY option from the WIRELESS

sub menu and then select YES or YES&REPORT. If you do not do this, the network settings will not be used

unless you switch the printer off and then on again.

NETBIOS/IP

You can enable and disable the NetBIOS facility to obtain the IP address.

You can restore the WLAN menu settings to factory default.

Control panel setup

8 - 10

Table of Contents

Hl-5280dw