Network Printing From Windows ® Basic Tcp/Ip Peer-To-Peer Printing; Overview; For Windows 2000/Xp And Windows Vista™ Users; Configuring The Standard Tcp/Ip Port - Brother DCP-560CN Network User's Manual

Hide thumbs Also See for DCP-560CN:
Table of Contents

Advertisement

Network printing from Windows
5
TCP/IP Peer-to-Peer printing

Overview

®
If you are a Windows
user and want to print using the TCP/IP protocol in a Peer-to-Peer environment, please
follow the instructions in this chapter. This chapter explains how to install the network software and the printer
driver which you will need to be able to print using your network printer.
Note
• You must configure the IP address on your machine before you proceed with this chapter. If you have not
configured the IP address, see Setting up the IP address and subnet mask on page 10 first.
• Verify the host computer and print server are either on the same subnet, or that the router is properly
configured to pass data between the two devices.
• If you are connecting to a Network Print Queue or Share (printing only), see Installation when using a
Network Print Queue or Share (printer driver only) on page 46 for installation details.
®
For Windows
®
By default, Windows
2000/XP and Windows Vista™ systems install the necessary print software to enable
you to print. This section describes the most commonly used configuration, Standard TCP/IP Port printing.
If you have already installed the printer driver, jump to Printer driver already installed on page 32.

Configuring the standard TCP/IP port

Printer driver not yet installed
a
Start the CD-ROM installation menu program according to the Quick Setup Guide.
b
Select the model name and your language (if necessary), and then click
Install Other Drivers or Utilities.
c
Click Printer Driver (Only, for network).
d
Click Next in response to the Welcome message. Follow the on-screen instructions.
e
Select Standard Installation and click Next.
f
Select Brother Peer-to-Peer Network Printer, and then click Next.
g
Follow the on-screen instruction, and then click OK.
Note
Contact your administrator if you are not sure about the location and name of the printer in the network.
h
Continue through the Wizard clicking Finish when complete.
2000/XP and Windows Vista™ users
®
basic
5
5
5
5
5
31
5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mfc-465cnMfc-680cn

Table of Contents