Brother HL-5270DN Network User's Manual page 76

®
For Macintosh
®
For Mac OS 9.1 to 9.2
(1) From the Apple menu, open the Chooser.
(2) Click the Brother Laser (IP) icon, and make sure that your print server name appears in the right
frame. If it is visible, then the connection is good. Otherwise, go to Step 4.
®
For Mac OS X 10.2.4 or greater
(1) From the Go menu, select Applications.
(2) Open the Utilities folder.
(3) Double-click the Printer Setup Utility icon.
(4) Click Add.
®
For Mac OS X 10.2.4 to 10.3: Go to (5).
®
For Mac OS X 10.4: Go to (6).
®
(5) For Mac OS X 10.2.4 to 10.3: Make the following selection.
(6) Make sure that your print server appears. If it is visible, then the connection is good. Otherwise, go
to Step 4.
4
If you have tried Step 1 to Step 3 above and it does not work, then reset the print server back to the
default factory settings and try from the initial setup again. For information how to reset to the default
factory settings, see Restoring the network settings to factory default on page 8-11.
Error during printing
If you try to print while other users are printing large amounts of data (e.g. many pages or pages with a large
amount of graphics at high resolution), the printer is unable to accept your print job until the ongoing printing
is finished. If the waiting time of your print job exceeds a certain limit, a time out situation occurs, which causes
the error message. In such situations, execute the print job again after the other jobs are completed.
Troubleshooting
9
9 - 6