Brother HL-5270DN Network User's Manual page 74
Multi-protocol on-board ethernet print server and wireless (ieee 802.11b/g) ethernet print server
Hide thumbs
Also See for HL-5270DN:
- User manual (152 pages) ,
- Quick setup manual (34 pages) ,
- Technical reference manual (517 pages)
Table of Contents
Advertisement
4
Verify that the print server is on your network as follows:
®
For Windows
Try pinging the print server from the host operating system command prompt with the command:
ping ipaddress
Where ipaddress is the print server IP address (note that in some instances it can take up to two
minutes for the print server to load its IP address after setting the IP address).
®
For Macintosh
®
For Mac OS
9.1 to 9.2 (for the wired network connection only)
(1) From the Apple menu, open the Chooser.
(2) Click the Brother Laser (IP) icon, and make sure that your print server name appears in the right
frame. If it is visible, then the connection is good. Otherwise, go to Step 5.
®
For Mac OS
X 10.2.4 or greater
(1) From the Go menu, select Applications.
(2) Open the Utilities folder.
(3) Double click the Printer Setup Utility icon.
(4) Click Add.
®
For Mac OS
X 10.2.4 to 10.3: Go to (5).
®
For Mac OS
X 10.4: Go to (6).
®
(5) For Mac OS
X 10.2.4 to 10.3: Make the following selection.
Troubleshooting
9
9 - 4
Advertisement
Table of Contents
Troubleshooting
