Energy Saver Mode - Xerox Versant 2100 Press Quick Start Manual

7 Language button
Use to select a different language for the touch screen options.
8 Power Saver button
Use this button if the press has been inactive and the touch screen is dark (system is
in Energy Saver mode). This button manually exits the system from Energy Saver mode;
it does not place the press in Energy Save mode.
9 Numeric Keypad
Use to enter alphanumeric characters. The C' Cancel Entry cancels the previous entry
made on the numeric keypad.
10 Clear All button
Use this button to return all selections to the same state as when the press was powered
on. Press once to clear a current entry. Press twice to return to default settings.
11 Stop button
Press to stop and pause the print job in progress.
12 Cancel Entry button
Use this button to cancel the previous entry made on the numeric keypad.
13 Start button
Press to start and print a selected report from the print engine. Also used by the CSE
during diagnostic routine procedures.
14 Press Status Lights
The three indicator lights that identify: data transmission in progress, the press is
experiencing an error, and main power is on.

Energy Saver Mode

The Energy Saver feature allows the press to enter a reduced power consumption mode
when all print jobs have completed and there are no jobs currently processing. There
are two energy saving modes: Low Power and Sleep.
By default, the press automatically enters the Low Power mode after 15 minutes of
inactivity. After 60 minutes of inactivity, the press then enters Sleep mode. These time
intervals for both modes can be changed by the system administrator.
Here are two examples:
If Low Power Mode is set to 15 minutes and Sleep Mode is set to 60 minutes, Sleep
Mode activates after 60 minutes of total inactivity, not 60 minutes after Low Power
Mode begins.
Xerox ® Versant 2100 Press
Quick Start Guide
Product Overview
1-5