Clearing Jams In The Output Module (Areas 3, 4 And 5) - Xerox Versant 2100 Press Quick Start Manual

7. Locate and push down on the green 2f lever to remove jammed paper from the
Duplex Transport Baffle.
8. Locate and lift up on the 2e lever to remove jammed paper.
9. Lift up the 2d Lever to remove jammed paper.
10. Grasp the green 2 handle and gently push in the Transfer Drawer completely. Turn
the green handle to the left to lock the drawer in place.
Be careful when clearing jams in the fuser area.
11. Close the Front Left and Front Center Doors completely. The press will not operate
if a door is open even slightly.

Clearing Jams in the Output Module (Areas 3, 4 and 5)

The Output or Exit Module contains entrance and exit areas that may require jam
clearance. If paper is jammed at the entrance area, make sure to remove that paper
first before pulling out the Exit Module Drawer. Area 3 clears jams at the entrance baffle.
Always refer to the press touch screen for what areas of the press have a paper jam.
1. Make sure that the press has stopped printing before opening doors.
Xerox ® Versant 2100 Press
Quick Start Guide
Paper Jams
6-5