Xerox Versant 2100 Press Quick Start Manual page 34

Maintenance
2. Open the front center cover and locate the waste bottle at the bottom right of the
press near the door.
3. Grasp the handle of the Dry Ink/Toner Waste bottle and pull it halfway out of the
press.
4. Grip the handle with one hand and slowly begin to remove the waste bottle from the
press.
Caution
Never use a vacuum cleaner when cleaning up spilled dry ink/toner. Use a broom or
a cloth moistened with a neutral detergent.
5. Since the waste bottle may be heavy, support the underside of the bottle with your
other hand as you continue pulling it out from the press.
6. Use both hand to place the old used Dry Ink/Toner Waste bottle into the provided
plastic bag.
7. Remove a new, empty waste bottle from the packaging.
8. Hold the center part on the top of a new bottle and insert it evenly and gently into
the press until it comes to a stop.
5-12 Xerox ® Versant 2100 Press
Quick Start Guide