Wired Headset; Network; In Charger Action - Mitel 5634 User Manual

USER GUIDE
Mitel 5634 VoWi-Fi Handset
• Transferring audio to/from the Bluetooth headset during calls using the handset menu.
The handset can be configured to show the dialog window asking whether the user wants
to transfer the audio for the outgoing call to the headset.
• Increasing/decreasing the volume in the Bluetooth headset with the volume buttons on the handset.
To enable Bluetooth, select Connections → Bluetooth → Enable. When enabled, the
Bluetooth icon appears on the display.
To add a new device, select Connections → Bluetooth → Headset → Add new.
8.2.2

Wired Headset

To achieve optimal audio quality with the different headset types, it is recommended to select
the corresponding headset profile.
To change the headset profile, perform as follows:
In the Connections menu, select Headset.
1.
2. Select the corresponding headset profile from the list. Choose among Mic on boom, Mic on cable, or
User model .
12
If the preconfigured headset profiles do not match the headset in use or the audio
performance is bad, a customized headset profile (User model) can be configured. Once
configured, a customized profile appears in the handset menu. Refer the
Fi Handset Configuration Guide
Press Select to confirm.
3.
8.2.3

Network

In the Connections menu, select Network.
1.
2. Select network in the list. The handset restarts if the network is changed.
8.2.4

In Charger Action

This section describes different types of actions that can be configured for the handset when it is placed
in a charger. Along with the options that can be selected directly from the handset menu, there are
additional functions, for example Clear Lists in Charger or In charger Message absent that are
configured using the WinPDM/WSM3/CPDM3 DM. For the details, refer to the Mitel 5634 VoWi-Fi Handset
Configuration Guide.
End Call
The handset can be configured to end an ongoing call when placed in the charger.
In the Connections menu, select In charger.
1.
2. Select Call behavior → End call.
Press Back to save changes.
3.
Turn Loudspeaker On
The handset can be configured to turn on the loudspeaker when placed in the charger during a call.
12. Only visible if the headset profile has been configured in the WinPDM/WSM3/CPDM3 DM.
58016275 / October 2020
.
Menu Operation
Mitel 5634 VoWi-
37