Use The Auto Phone Lock; Use The Handset As A Shared Phone - Mitel 5634 User Manual

Vowi-fi handset
Hide thumbs Also See for 5634:
Table of Contents

Advertisement

USER GUIDE
Mitel 5634 VoWi-Fi Handset
Unlock Keypad
In Idle mode, press the Lock key
1.
The dialog window Unlock? is displayed. Confirm by pressing Yes.
2.
3.4

Use the Auto Phone Lock

The handset can be locked to prevent from unauthorized access. If this function is enabled, the handset
will be locked automatically after certain time of inactivity or when placed in a charger
shall be entered to unlock the handset.
Turn on/off the Auto Phone Lock
In the Settings menu, select Locks → Phone lock → Auto phone lock.
1.
2.
Select On or On in charger to enable the
function. Select Off to disable the function.
3.
Enter PIN code (default PIN is 0000).
The default PIN can be changed to any 4-8-digit personalized code. If a user has forgotten
the PIN code, it can be reset by the system administrator.
Press OK.
4.
3.5

Use the Handset as a Shared Phone

The Shared phone feature allows more than one user to use a handset. When a handset is configured to
be a shared phone, it can be used by any shared phone user in the system.
All parameters and settings that are set in the WSM3/CPDM3 DM are loaded to the handset upon login.
Parameters that are changed by a user who is logged into the handset are stored by the WSM3/CPDM3
DM. When the handset is logged out or switched off, the message list and call list in the handset
disappears and is empty when a new user logs in to the handset.
By default, the handset is in Personal mode. The handsets are configured to be shared using the
WSM3/CPDM3 DM. The Phone mode must be set to Shared in the Device → General menu of the
WSM3/CPDM3 DM. If the user is configured as personal (that is not shared), the handset becomes a
personal phone upon first login.
Log into the Handset
The handset must be switched on. For the details, refer to the
1.
Enter the Call ID.
2.
If required, enter the password.
3.
Press Login.
Log out from the Handset
In Idle mode, press and hold the On/Off key .
1.
2.
The dialog window Log off? is displayed. Press Yes to confirm.
At logout the owner ID is automatically removed from Idle mode screen, but may remain in the
screen saver until the screen saver is turned off.
1.
Configurable feature.
58016275 / October 2020
.
3.1 Switch the Handset On and Off, page
Basic Operation
, and a PIN code
1
10.
11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents