Download  Print this page

Dual Access (monochrome Only); Real Time Transmission - Brother MFC-265C User Manual

Hide thumbs

Advertisement

Chapter 5
Dual access
(Monochrome only)
You can dial a number and start scanning the
fax into memory—even when the machine is
sending from memory, receiving faxes or
printing PC data. The LCD shows the new job
number and available memory.
The number of pages you can scan into the
memory will vary depending on the data that
is printed on them.
Note
If the Out of Memory message appears
while scanning documents, press
Stop/Exit to cancel or Mono Start to send
the scanned pages.

Real time transmission

When you are sending a fax, the machine will
scan the documents into the memory before
sending. Then, as soon as the telephone line
is free, the machine will start dialling and
sending.
If the memory is full or you are sending a
colour fax, the machine will send the
document in real time (even if
Real Time TX is set to Off).
Sometimes, you may want to send an
important document immediately, without
waiting for memory transmission. You can set
Real Time TX to On for all documents or
Next Fax Only for the next fax only.
Note
In Real Time Transmission, the automatic
redial feature does not work when using
the scanner glass.
28
Sending in real time for all faxes
a
5
Make sure you are in Fax mode
b
Press Menu, 2, 2, 3.
3.Real Time TX
Realtime TX:On
c
Press a or b to choose On (or Off).
Press OK.
Sending in real time for the next fax
only
a
Make sure you are in Fax mode
b
Press Menu, 2, 2, 3.
c
Press a or b to choose
5
Next Fax Only. Press OK.
d
Press a or b to choose Next Fax:Off
or Next Fax:On.
e
Press OK.
Note
In real time transmission, the automatic
redial feature does not work when using
the scanner glass.
5
.
5
.

Advertisement

Table of Contents

   Related Manuals for Brother MFC-265C

This manual is also suitable for:

Mfc-230c

Comments to this Manuals

Symbols: 0
Latest comments: