Real Time Transmission - Brother MFC-8510DN Advanced User's Manual

Cancelling a Broadcast in progress
While broadcasting you can cancel the fax
currently being sent or the whole broadcast
job.
a
Press Menu, 2, 7.
The LCD will display the Broadcast job
number followed by the fax number or
name being dialled (for example,
#001 0123456789) and the broadcast
job number (for example,
Broadcast#001).
27.Remaining Jobs
a #001 0123456789
b Broadcast#001
Select ab or OK
b
Press a or b to choose one of the
following:
 Choose the fax number being
dialled, and press OK.
 Choose the broadcast job number,
and press OK.
27.Remaining Jobs
Broadcast#001
1.Clear
a
2.Exit
b
Select ab or OK
c
Press 1 to cancel the fax number or
Broadcast job number you chose in
step b, or press 2 to exit without
cancelling.
If you chose to only cancel the fax
currently being sent in step b, the LCD
will ask you if you want to cancel the
broadcast job. Press 1 to clear the whole
broadcast job or 2 to exit.
d
Press Stop/Exit.

Real Time Transmission

3
When you are sending a fax, the machine will
scan the documents into the memory before
sending it. Then, as soon as the telephone
line is free, the machine will start dialling and
sending.
Sometimes, you may want to send an
important document immediately, without
waiting for memory transmission. You can set
Real Time TX to On for all documents or
Next Fax:On for the next fax only.
Note
• If the memory is full and you are sending a
fax from the ADF, the machine will send
the document in real time (even if
Real Time TX is set to Off). If the memory
is full, faxes from the scanner glass cannot
be sent until you clear some of the
memory.
• In Real Time Transmission, the automatic
redial feature does not work when using
the scanner glass.
Sending in real time for all faxes
a
Make sure you are in FAX mode
b
Press Menu, 2, 2, 5.
c
Press a or b to choose On.
Press OK.
Sending a fax
3
3
3
.
17