Faxing From The Scanner Glass; Scan Fax - Brother MFC-9100C Owner's Manual

Brother mfc-9100c: users manual
Hide thumbs Also See for MFC-9100C:
Table of Contents

Advertisement

Faxing from the Scanner Glass

Scan Fax

You can fax pages from a book using the scanner glass. Documents are
sent from memory; they can be letter or A4 size (8.5 inches to 11.7
inches). To use the Scanner glass, the ADF must be empty.
1
Lift the document cover.
2
Using the document guidelines on the left, center the document face down
on the scanner glass.
3
Close the document cover.
If the document is a book or is thick, do not slam the cover or press on it.
4
Dial the fax number, then press
The MFC starts scanning the first page.
5
To send a single page, go to Step 7—OR—
To send multiple pages, go to
Step 6.
6
Place the next page on the scanner
glass and press
additional page.)
7
Press
to begin dialing.
Start
Press
to cancel. If the document was scanned into memory, press
Stop
to CLEAR it—OR—
If memory is full, and you are faxing a single page, it will be sent in real
time.
Start
. The MFC starts scanning. (Repeat Step 6 for each
Set
to EXIT.
2
.
MEMORY #01 100%
SET:NEXT PAGE
START:TO DIAL
S E T U P S E N D
Document is
Face Down
1
6 - 3

Advertisement

Table of Contents
loading

Table of Contents