Table of Contents
Advertisement
Quick Start Procedures
If you want to start sending and reading InfoImages immediately, these are
the basic procedures.
How to Send an InfoImage
You must be in the FaxSpeed application to select the file(s) you wish to
send as an InfoImage.
To Send an InfoImage with FaxSpeed Standard Send:
1
From the FaxSpeed program group, select the FaxSpeed
Send icon.
The FaxSpeed Send dialog box appears.
2
Select the drive and directory where the files you want to send are stored.
3
Highlight the file(s) to be converted to the InfoImage format.
The InfoImage file size can not exceed 32K. You can monitor the file size
during this file selection process by checking the Total Size (KB) field in
the InfoImage Contents section of this dialog box.
4
Select the OK button.
The selected files will be displayed in the InfoImage Contents dialog box.
5
Select the Send button.
The Sending InfoImage window appears.
Then the Multi-Function Link
6
Enter the required information in the Send fax to field. You can select a
fax number from your Multi-Function Link
Multi-Function Link
CD-ROM for details.)
7
Select the Send Fax button.
The Document Conversion window appears.
Through the speaker of your MFC, you will hear the fax number being
dialed and the fax transmission being sent.
®
Pro Send Fax dialog box appears.
®
Pro On-line Documentation on the Brother MFL Pro
®
Pro Phone Book. (See
C O L O R F A X I N G
19 - 5
Advertisement
Table of Contents
