Table of Contents
Advertisement
IMPORTANT
Please see the README.WRI file in the root directory of the CD-ROM
(or diskette) for last minute important installation and troubleshooting
information.
Receiving Messages into the PC
To receive faxes into your PC through the MFC: (See Connecting the
MFC to the Computer, page 12-3.)
1
Make sure the MFC is connected to the PC. The PC and the
Multi-Function Link
2
Load the Multi-Function Link
(See Installing Multi-Function Link
page 12-4.)
3
On your PC in the Multi-Function Link
A Select Setup from the Preferences... pull-down menu in the Main
Menu.
B Under Answer Mode select Fax only.
C Click the OK button.
4
Check that the Multi-Function Link
Multi-Function Link
You can switch Multi-Function Link
you want your fax messages to go directly into your PC, make sure the MF
Link setting is ON. If you want faxes to print on your MFC when they
arrive, you can switch MF Link mode to OFF. (See On-Line
Documentation for Multi-Function Link
and Using the Multi-Function Link
1
Press
,
Function
2
Press
or
3
Press
to exit.
Stop
12 - 8
S E T T I N G U P T H E M F C A N D C O M P U T E R
®
Pro Main Menu must be running at all times.
®
®
Pro Mode
,
,
.
1
2
8
to select ON (or OFF) and press
Pro software into your PC.
®
Pro Software (CD-ROM 1)
®
Pro software:
®
Pro mode is ON (see below).
®
Pro Mode on and off as needed. If
®
Pro on the Brother CD-ROM
®
Pro Software Chapter 15, page 15-1.)
Set
.
Advertisement
Table of Contents
