Faxing From The Scanner Glass; Setting Scanner Glass Size For Faxing (Mfc-5890Cn Only) - Brother MFC-5890CN User Manual

Faxing from the scanner glass

You can use the scanner glass to fax pages
of a book one at a time. The documents can
be up to A3 size for MFC-6490CW, and A4
size for MFC-5890CN.
You cannot send colour faxes with multiple
pages.
Note
• Since you can only scan one page at a
time, it is easier to use the ADF if you are
sending a multiple page document.
• (MFC-6490CW only)
You can send colour faxes up to A4 in size.
a
Press
b
Load your document face down on the
scanner glass. (See Using the scanner
glass on page 23.)
c
Enter the fax number using the dial pad,
One Touch, Speed Dial or Search.
Note
You can preview a fax message before
sending it by pressing Fax Preview. For
details, see How to preview an outgoing
fax on page 42.
d
Press Mono Start or Colour Start.
If you press Mono Start, the
machine starts scanning the first
page. Go to step e.
If you press Colour Start, the
machine starts sending the document.
Downloaded from ManualsPrinter.com Manuals
(Fax).
e
Do one of the following:
5
To send a single page, press 2 to
choose No (or press Mono Start
again).
The machine starts sending the
document.
To send more than one page, press 1
to choose Yes and go to step f.
f
Place the next page on the scanner glass.
Press OK.
The machine starts scanning the page.
(Repeat steps e and f for each
additional page.)
Setting scanner glass size for
faxing (MFC-5890CN only)
When documents are Letter size, you need to
set scan size to Letter. If you do not, the side
portion of the faxes will be missing.
a
Press
b
Press a or b to choose
Glass ScanSize.
c
Press d or c to choose Letter (or A4).
Press OK.
Note
• You can save the setting you use most
often by setting it as default. (See Setting
your changes as a new default
on page 47.)
• This setting is only available for sending
documents from the scanner glass.
Sending a Fax
(Fax).
5
5
41