Troubleshooting - Saneo 9000 BTU AC016D Manual

4. If the unit is damaged, please contact a competent repairer.
3. Air filter
The filter must be cleaned every 2 weeks in order to remove dirt and
-
dust:
d. Open the air inlet grille and remove the filter.
e. Clean the filter with detergent in lukewarm water and leave it to dry.
f. Once the filter is dry, put it back into the grille.
4. Cleaning the outer part of the air conditioner
Clean the surface of the appliance with detergent and a damp cloth.
-
Then, dry the appliance with a dry cloth.
Never clean the appliance with chemical products.
-

TROUBLESHOOTING

Problem
The air
conditioner does
not work.
Possible reasons
There is no electricity.
The 'water tank full' indicator is on.
The room temperature is too low or too
high.
In cooling mode, the room temperature
is lower than the set temperature; in
heating mode, the room temperature is
higher than the set temperature.
Solutions
Plug the air conditioner into the mains supply.
Empty the water tank.
The air conditioner must be used in a room
with a temperature between 7°C and 35°C.
Reset the temperature.