Troubleshooting - Saneo A007I-05C Instruction Manual

2. Cleaning the outer part of the air conditioner
-
Clean the surface of the appliance with detergent and a damp cloth.
-
Then, dry the appliance with a dry cloth.

TROUBLESHOOTING

Problem
1. The appliance won't turn
on.
2. The room does not cool
down enough.
3.The 'Power Off' function is
in heating mode.
Possibles Causes
The 'full tank' indicator light
is blinking and the water
tank is full.
The room temperature is
higher than the
temperature
mode).
The room temperature is
lower than the
temperature
mode).
Doors and windows are not
closed.
There are sources of heat in
the room.
The exhaust pipe is not
connected or is blocked.
The set temperature is too
high.
The air inlet is blocked.
When the temperature of
the air outlet is higher than
Empty the water tank.
Reset the temperature.
set
(heating
Reset the temperature.
set
(cooling
Close doors and windows.
Remove or switch off the
sources of heat.
Connect the exhaust pipe or
clean it.
Reset the temperature.
Clean the air inlet.
Switch the appliance back
on when the temperature
Solutions