Troubleshooting - Saneo A007J-09C Instruction Manual

e. Clean the filter with detergent in luke warm water and leave it to dry.
f. Once the filter is dry, place it back in the grill.
2. Cleaning the outer part of the air conditioner
-
Clean the surface of the appliance with detergent and a damp cloth.
-
Then, dry the appliance with a dry cloth.
Problem
1. The appliance won't turn
on.
2. The room does not cool
down enough.

TROUBLESHOOTING

Possibles Causes
The 'full tank' indicator light
is blinking and the water
tank is full.
The room temperature is
higher than the
temperature
mode).
The room temperature is
lower than the
temperature
mode).
Doors and windows are not
closed.
There are sources of heat in
the room.
The exhaust pipe is not
connected or is blocked.
Empty the water tank.
Reset the temperature.
set
(heating
Reset the temperature.
set
(cooling
Close doors and windows.
Remove or switch off the
sources of heat.
Connect the exhaust pipe or
clean it.
Solutions