Saneo 9000 BTU AC016D Manual page 43

Table of Contents

Advertisement

Available languages

Available languages

1. Press the
2. Press the
3. Press the
4. Press the
dehumidifier.
5. Press the
6. Press the
7. Press the
INSTALLATION
It is important that the instructions below are respected to successfully install this portable air
conditioner. If you have any difficulties or questions regarding these installation procedures, please
contact the customer service department.
Before installation:
IMPORTANT – before installing and operating the air conditioner, keep the unit upright for at least
2 hours.
Installation of the drain pipe
- Insert the drain pipe (the end of the drain joint ) into the ventilation slot on the rear panel (push
to the left, as shown in the diagram below)
button to turn the appliance on or off.
button to set the timer.
button to lower the temperature.
button to choose one of the following functions: cooling, fan or
button to increase the temperature.
button to select the wind speed.
button to activate the standby mode.

Advertisement

Table of Contents
loading

Table of Contents