Quick Reference Guide; Sending Faxes; Receiving Faxes; Storing Numbers - Brother MFC-7300C Owner's Manual

Quick Reference Guide

Sending Faxes

Automatic Transmission
1
Place the original face down in the
ADF.
2
Enter the fax number using One
Touch, Speed Dial, Search or the
dial pad.
3
Press Start.
Sending a Cover Page
1
Place the original face down in the
ADF.
2
Press Function, 1, 3, 1.
3
When NEXT FAX ONLY?
appears, press Set.
4
Press or
OFF) and press Set.
5
Press or
comment and press Set.
6
Enter two digits to indicate the
number of pages being sent and
press Set.
7
Press 1 to select additional settings
—OR—Press 2 if you are ready to
fax.
8
Enter the fax number.
9
Press Start.
Real Time Transmission
You can send faxes in real time.
1
Place the original face down in the
ADF.
2
Press Function, 1, 3, 9.
3
Press or
press Set—OR—For the next
transmission only, press
to select NEXT FAX ONLY and
press Set.
to select ON (or
to select a
to select ON and
or
4
For the next fax only, press
to select ON and press Set.
5
Press 1 to select additional settings
—OR—Press 2 to fax.
6
Enter the fax number.
7
Press Start.

Receiving Faxes

Select Receive Mode
Press Receive Mode to select
FAX/TEL, TAD, MANUAL , or
FAX ONLY . If you select FAX/
TEL , make sure to set Ring Delay
and F/T Ring Time.
Manual Reception
1
Pick up the handset.
2
Press Start if you hear fax tones
(beeps).
3
When the screen displays
RECEIVE, replace the handset.

Storing Numbers

Storing One Touch Dial
Numbers
1
Press Function, 1, 5, 1.
2
Press the One Touch key where
you want to store the number.
3
Enter a number (up to 20 digits)
and press Set.
4
Enter a name (or leave it blank) and
press Set.
5
Press or
TEL, or FAX/TEL and press Set.
6
Press Stop.
Storing Speed Dial Numbers
1
Press Function, 1, 5, 2.
or
to select FAX,
vii