Walk-Up Video Printing; Getting Started; Auto Switch - Brother MFC-7300C Owner's Manual

12

Walk-Up Video Printing

12

Getting Started

Walk-Up Video Printing lets you use your MFC, connected to your camcorder,
digital camera, video game, or VCR, to view a video on the attached equipment.
The video signal and the output you create are NTSC (National Television
System Committee). This is not compatible with any other standard.
With no documents in the feeder, plug the cable from your video camera's
Video Out jack into the MFC's RCA pin jack. Play the video.
Some camcorders, digital cameras, video games or VCRs do not correctly
conform with NTSC standards. Then you would not be able to capture video
signals.

Auto Switch

Whenever you connect video equipment to
the MFC and turn the video signal on, the
MFC's Copy keys automatically switch to
video printing mode.
r
The LCD will display:
VIDEO:PRESS COPY
CAPTURE READY
As soon as you turn off the video equipment or disconnect it, the Copy Keys
return to normal copy mode.
You cannot access video printing mode if you have too much in memory.
12 - 1
W A L K - U P V I D E O P R I N T I N G