Auto Dial Numbers
8
8
and Dialing Options
Storing Numbers for Easy Dialing
You can set up your MFC to do three types of easy dialing: One Touch, Speed
Dial and Groups for Broadcasting faxes.
If you loose electrical power, auto dial numbers in memory will
Storing One Touch Dial Numbers
You can store 8 fax/phone numbers that you can dial by pressing one key (and
Start). You also can store names with these numbers. When you press a One
Touch dial location, the screen displays the name or number as the call is dialed.
(See
One Touch Dialing
One Touch keys are not the dial pad keys. They are the 4 keys (numbers 1–4)
located underneath the dial pad.
Numbers 5-8 are accessed by holding down shift while you press the
appropriate One Touch key.
1
Press Function, 1, 5, 1.
2
Press the One Touch key where you want to store a number. To store a number
in locations 5–8, press Shift, then press a key.
(One-Touch key 1 is pre-programmed for Brother fax-back system, USA only.
You can override it if you wish.) The screen displays the location you selected.
3
Enter a number (up to 20 digits) and press Set. If you want to enter a pause in
the dialing sequence (for example, to wait for an "outside line" ), press
Redial/Pause as you're entering digits. Pressing Redial/Pause enters a 3.5
second pause when the number is dialed, and a dash appears on the screen.
4
Use the dial pad to enter the name (up to
15 characters) and press Set. You can
use the chart on page 5-2 to help you
enter letters—OR—To store the number without a name, press Set.
5
Press
or
FAX
TEL
FAX/TEL both a fax and telephone (voice) number
8 - 1
A U T O D I A L N U M B E R S A N D D I A L I N G O P T I O N S
, page 8-5.)
to select the type of number and press Set.
a fax only number
a telephone (voice) number
not
be lost.
NAME: