Dispensing Of Beverages; General Indications; Stop Dispensing Function; Selection Repetition Function - Cimbali FAEMA Use And Installation

11. Dispensing of beverages

- GENERAL INDICATIONS

DISPLAY SCREENS
In Touch Screen machines, up to 18 different beverage
options can be set, divided into three screens with 6
options each.
To display the different beverage options available, use the
keys (47) to scroll through the screens (only if function is
. The symbol
screen indicates which of the three screens is displayed.
Note: when a beverage is selected in the second or third
appear again on the Touch Screen.

STOP DISPENSING Function

Stops the selected beverage from being dispensed before
the programmed dose has been reached.
Pressing the selection key again stops beverage dispensing
before it reaches the programmed dose.
Note: Pressing the key does not change program settings.

SELECTION REPETITION Function

This function can be activated in various ways:
1) setting the desired number at the repeats entry in the
beverage recipe (see CLIENT PROGRAMMING and
paragraphs referring to Key Menu).
Note: To have access to customer programming,the
function must have been previously enabled by the installer
YES".
2) Press any one of the selection keys and after about 3
seconds press the same key again for the number of
dispensed drinks required.
Note: This second mode can be used only if the
"Technician programming/Configuration/
Stop: NO" WAS NOT enabled by the installer.
The number of programmed beverages is indicated on
the key.
To zero this setting, press the selection key and hold it
down for about 3 seconds.

11.1 Dispensing of beverages - coffee

GENERAL INFORMATION
Place the cup under dispenser (1) of the required group.
Adjust the height of the dispenser (1) if necessary.
Press the coffee dispensing key relative to the selected
dose. The selected key remains pressed and the beverage
is dispensed.
Dispensing stops automatically.
at the top right of the display
.
NOTE. These functions are deactivated when error mes-
sages and/or codes are displayed and the item "Techni-
cian programming/
"YES".

BUZZER

whenever any key is pressed. To enable or disable the
function, press the icon
MESSAGES (Self version only)
The machine displays messages on the Touch Screen
that indicate the operations for beverage dispensing.
If a key is pressed before a receptacle is placed beneath
the dispensing nozzle, the following message and image
appear on the display:
After the dispensing process, the same image will appear
along with the message "PICK-UP THE DRINK" and will
remain on the Touch Screen until the receptacle is removed.
13 EN
47
/ " is set on
on the Touch Screen.
PLACE CUP
1