Dispensing Of Beverages; General Indications - Cimbali S39 TouchScreen Manual

English

- GENERAL INDICATIONS

DISPLAY SCREENS
In Touch Screen machines, up to 18 different beverage options
can be set, divided into three screens with 6 options each.
To display the different beverage options available, use the keys
(47) to scroll through the screens (only if function is enabled).
The symbol at the top right of the display screen indicates
which of the three screens is displayed.
STOP DISPENSING Function
Stops the selected beverage from being dispensed before the
programmed dose has been reached.
This can be done by setting the "Stop dispensing" parameter
key works as a START/STOP key.
Note: Pressing the STOP key does not change the parameters
set in the programming menu.
This function must be programmed by the installation
technician.
SECTION REPETITION Function
This function can be activated in various ways:
1) Press any one of the selection keys and after about 3
seconds press the same key again for the number of
dispensed drinks required.
The number of programmed beverages is indicated on the
key.
To zero this setting, press the selection key and hold it down
for about 3 seconds.
2) Setting the desired number at the repeats entry in the
beverage recipe (see CLIENT PROGRAMMING and
paragraphs referring to Key Menu).
NOTE: These functions are deactivated when error messages
and/or codes are displayed and the item "Program. block" is
set on "YES".

3. Dispensing of beverages

46
47
English
47