Cimbali FAEMA Use And Installation page 79

12. Cleaning operations
Preset automatic washing cycle
Function - after each milk cycle has terminated, the timer
count-down starts (max 210'). At the end, "AUTOMATIC
WASHING" appears on the display, with the time
remaining before the wash cycle begins.
Activation - activation is automatic at the end of the
remaining 30" seconds. During this stand-by time:
if the coffee dispensing key is pressed, the timer count-
down will start again from 30" seconds before the end
of the dispensing cycle;
if the milk/cappuccino dispensing key is pressed, the
timer count-down will start from the set up time (210').
Selection block - always inactive. The wash cycle is
performed even if the user does not intervene.
Wash type - with milk or water, completely automatic.
Special conditions
1) with each washing cycle with detergent (at a preset
time) or daily washing cycle:
In this case, the entire circuit is washed. Therefore,
is considered free of residual milk and the timer (210')
countdown is not launched.
2) each time the machine is switched off while the timer
countdown (210') is underway:
when the machine is switched on again, if 210' have
passed, once the machine reaches its operating
temperature, the preset automatic washing cycle is
launched and cannot be stopped.
Automatic wash (if programmed)
Function - after each milk cycle has terminated, the timer
count-down starts (from 10 to 99 minutes, OFF disabled
function). At the end, "AUTOMATIC WASHING" appears
on the display, with the time remaining before the wash
cycle begins.
Activation - activation is automatic at the end of the
remaining 30" seconds. During this stand-by time:
if the coffee dispensing key is pressed, the timer count-
down will start again from 30" seconds before the end
of the dispensing cycle;
if the milk/cappuccino dispensing key is pressed, the
timer count-down will start from the set up time (10'÷99').
Selection block - always inactive. The wash cycle is
performed even if the user does not intervene.
Wash type - with water, completely automatic.
For more details, please consult the technical manual
Level 1
When the machine is blocked, and the following message
appears on the display:
MACHINE LOCKED WASH X
where "X" indicates the type of washing cycle requested.
Pressing the PRG (29)
displays washing options. The washing cycle starts if
the key PRG (29)
the requested washing line or when the entry is pressed
directly on the Touch Screen.
The washing cycle takes place and the machine is
unblocked.
Note: In the absence of washing messages and
when the machine is used frequently, washing
cycles can be performed at any time by following
the instructions described previously.
27 EN
29
26
key and then the icon
is pressed when the cursor is on