Key Menu - Mixed Soluble Selection; Meter Display And Reset - Cimbali FAEMA Use And Installation

17.6 Key menu - Mixed soluble selection

Press one of the mixed soluble dispensing keys. The di-
splay appears as follows:
KEY MENU
type
Repetition
Milk dose
Emulsion
cold milk dose

18. Meter display and reset

CUSTOMER PROG.
KEY MENU
CUSTOMER PROG.
Press the key to view the counters.
The following message will appear on the Touch Screen:
CONTATORI
COUNTERS MENU
N°caffè
N°coffee
N°latte
N°milk
N°acqua
N°water
N°vapore
N°steam
N°vap. aria
N°steam+air
1 mixed solub.
1
7.0
3.0
5.0
COUNTERS MENU
PERSONALIZATION
12
23
23
12
10
10
8
0
6
0
The following mixed soluble selection parameters can be
- repetition (it represents the number of distributions of
the selected drink, from 001 to 099);
- Milk dose (milk dispensing time: 0 ÷ 60 seconds, with
increments of 0.1);
- emulsion ((foamed milk dispensing time, 0 ÷ time set in
the milk dose);
- cold milk dose (cold milk dose; the setting of this parameter
makes it possible to obtain warm milk; setting between 0
to 20 with increments of 0.1 seconds);
- label (the text indicating the beverage that appears on
the key);
- icon (the picture of the beverage that appears on the key).
To zero the count: go to the parameter, press the "plus"
or "minus" , keys, and then press the
The total number of coffees and cycles CANNOT be zeroed.
The total number of grindings of the grinding units (MM1
and MM2) can only be zeroed by the installation technician
if a grinder is replaced.
Press the key RES (24)
39 EN
key to
to return to the previous menu.