Conventional Connection; Connection With Temperature Limiter - Atlantic CHAUFFEO VS 500L Installation And Operating Manual

3. Water heater water connections
The water heater must be connected in accordance with the standards and regulations in the
country in which it is installed (for France: DTU Plumbing 60-1).

3.1 Conventional connection

Tighten the dielectric connection (provided, depending on the version) onto the hot water outlet
(red) on your water heater.
Tighten your pipes on your water heater.
Your pipes must be rigid (copper) or exible (standardised braided stainless steel hoses)
and able to withstand 100°C and 10 bar (1 MPa). Otherwise, use a temperature limiter.
Dielectric
connection
MANDATORY
Hot water connection Cold water connection
3.2 Connection with a temperature limiter
a temperature limiter (or thermostatic regulator).
The limiter must never be connected directly
to the water heater.
The temperature limiter enables the risks
of burning to be limited.
26
WARNING
Te on to be
applied in
the direction
of screwing
NEW
safety unit
Siphon
MANDATORY
must withstand
100° C and 10 bar
Waste water
drainage
Dielectric
connection
Temp.
limiter
MANDATORY
New and renovated
(decree of 30/11/2005)
ESSENTIAL
For pipes made from PER
Unit
safety
Siphon