Real Time Transmission - Brother MFC-590 Owner's Manual

Real Time Transmission

When you are sending a fax, the machine will scan documents into memory before sending. Then,
as soon as the phone line is free, the machine will start dialling and sending the fax. If memory
becomes full, the machine will send the document in real time (even if REAL TIME TX is set to
OFF).
Sometimes you may want to send an important document immediately, without waiting for memory
transmission. You can set REAL TIME TX to ON.
1
Insert the document face up in the ADF, or face down on the glass platen.
2
Press Menu/Set, 2, 2, 5.
3
To change the default setting, press
Go to Step 6—OR—For the next fax transmission only, press
ONLY.
4
Press Menu/Set.
5
For the next fax only, press
6
Press 1 if you want to select additional settings. The display returns to the SETUP SEND
menu—OR—Press 2 if you have finished choosing settings and go to Step 7.
7
If you switched ON Real Time Transmission for the next fax only, enter the fax number and
press Mono Fax Start.
This setting has no effect on Colour faxes. Colour faxes are always sent by using
Real Time Transmission.
or to select ON (or OFF) and press Menu/Set.
to select ON (or OFF) and press Menu/Set.
or
or to select NEXT FAX
Sending a Fax
27