Using The Options Key - Brother MFC-590 Owner's Manual

Using the Options Key

The Options key changes the settings for number of copies, paper type, brightness, stack/sort and
special copy options for the next copy only. See the explanation below the table.
Press Options
NO. OF COPIES
PAPER TYPE
BRIGHTNESS
STACK/SORT
SPECIAL
Paper Type
You can change the setting of paper type for next copy only.
1
Insert the original face up in the ADF, or face down on the glass platen.
2
Press Options.
3
Press or
4
Press or
TRANSPARENCY), and press Menu/Set.
5
If you selected GLOSSY, press
press Menu/Set.
The print quality of black ink varies depending on the kind of glossy paper you are
using. Black ink is used when you select 4-COLOUR. If the glossy paper you are
using repels the black ink, select 3-COLOUR, which simulates black ink by
combining the three ink colours.
6
Press Mono Copy or Colour Copy—OR—Press
Copy Brightness
1
Insert the document face up in the feeder, or face down on the glass platen.
2
Press Options and Press
BRIGHTNESS, and then press Menu/Set.
3
Press to make a lighter copy—OR—Press
Menu/Set.
4
Press Mono Copy or Colour Copy—OR—Press
54
Chapter 10
Menu Selections
to select PAPER TYPE, and then press Menu/Set.
to select the type of paper you are using (PLAIN, INK JET, GLOSSY or
or
or to select
Options
NO.OF COPIES:XX
PLAIN/INK JET/
GLOSSY (4-COLOUR
or 3-COLOUR)/
TRANSPARENCY
– +
STACK/SORT
2IN1/4IN1/
POSTER/OFF
to select 4-COLOUR or 3-COLOUR, and then
or
to make a darker copy, and then press
or
Factory Setting
01
PLAIN
–
STACK
OFF
for additional settings.
– +
for additional settings.
+