Temporary Copy Setting - Brother MFC-590 Owner's Manual

Temporary Copy Setting

You can improve your copies by using the Copy keys: Enlarge/Reduce, Quality, and Options.
These settings are temporary, and the machine returns to its default settings 30 seconds after it
finishes copying. If you want to use these temporary settings again, place the next document in the
ADF or glass platen before 30 seconds expire.
Copy Keys
Copying Using Multiple Settings
You can try different combinations of settings for the best results. After you finish your settings
using the Enlarge/Reduce, Quality and Options keys.
The LCD shows:
I Press
or
—OR—
Press Mono Copy or Colour Copy if you are finished choosing settings.
Using the Quality Key
The Quality key changes the settings for copy quality (NORMAL,
BEST or FAST).
Press Quality continuously or press
lights change.
Press NORMAL
Quality
and
BEST
or
FAST
1
Insert the document face up in the ADF, or face down on the glass platen.
2
Press Quality.
3
Press or
4
Press Mono Copy or Colour Copy—OR—Press
52
Chapter 10
if you want to select additional settings.
or
Recommended mode for ordinary printouts. Good copy quality
with adequate copy speed.
Use this mode to copy precise images such as photographs.
BEST uses the highest resolution and slowest speed.
Fast copy speed and lowest ink consumption. Use FAST to save
time (documents to be proof-read, large documents, or many
copies).
to select the copy quality resolution, and then press Menu/Set.
PRESS COPY OR
after pressing Quality until you see the indicator
or for additional settings.
FOR NEXT OPT.