Preparation And Simple Use Guide - Brother MFC-590 Owner's Manual

Preparation and Simple Use Guide

Steps to prepare and use the machine simply
Follow the steps below to prepare and use the machine simply.
However, before you perform these steps, see Important Safety Information (page 137), and
Advice for Preparation and Simple Use Guide (page 5).
If you need further information, refer to BASIC FAX USE or ADVANCED FAX USE.
1 Read the Quick Setup Guide
Follow the instructions on the Brother Quick Setup Guide to set up the machine.
2 Setting the Document
You can scan the document for faxing and copying from either the ADF (Automatic Document
Feeder) or from the glass platen.
Using the ADF (Automatic Document Feeder)
The automatic document feeder (ADF) can hold up to 30 pages, feeding each one individually
through the machine. Use standard (75 g/m
well before placing them in the feeder.
Recommended Environment
Temperature: 20-30˚C (68-86˚F)
Humidity: 50%-70%
DO NOT use curled, wrinkled, folded, or ripped paper, or paper with
staples, paper clips, paste or tape attached. DO NOT use cardboard,
newspaper, or fabric. (To copy or scan this kind of document, see Using
the Glass Platen, page 3.)
I Make sure documents written with ink are completely dry.
I Documents must be from 14.8 to 21.6 cm wide, and from 14.8 to 35.6 cm long.
Unfold the document tray
1
extension.
Unfold the document stopper.
2
2
) paper when using the ADF. Always fan the pages
Document
tray extension
Preparation and Simple Use Guide
Document
Stopper
1