Brother MFC-590 Owner's Manual page 11

Fan the pages and tap them on the desk so they are even.
3
Insert documents face up, top edge first in the ADF until they lightly touch the feed roller.
Adjust the paper
4
guides to fit the width
of your pages.
Setting the Special Media Lever
You can use the special media lever to select the Regular Position (
To feed regular types of documents, move the special media lever to the Regular Position (
You can feed multiple pages.
To feed special types of documents (such as thin paper, thick paper, coated paper or glossy paper),
move the special media lever to the Special Position (
allow the document to feed through the ADF without slipping or jamming.
If you want to use thick papers and slippery papers, adjust the thickness lever
of paper.
If the original "double-feeds" try again by inserting a simple sheet of document
in the ADF or use glass platen.
2
Documents are
Face Up
in the ADF
) or Special Position (
). Feed the document one by one. It will
Regular Position
Special Position
Special Media Lever
30˚
).
).