Setting The Clock Change; Turning Off The Scanner Lamp - Brother MFC-590 Owner's Manual

Setting PABX
If the machine is connected to a PABX system, set PBX:ON. If not, set OFF.
1
Press Menu/Set, 1, 5.
2
Press or
selection.
3
Press Stop/Exit.
You can program a Tel/R keypress as part of a number stored in a Speed Dial
location. When programming the Speed dial number (Function menu 2-3-1) press
Tel/R first (the screen displays "!"), then enter the telephone number. If you do this,
you do not need to press Tel/R each time before you dial using a Speed Dial
location. (See Storing Numbers for Easy Dialling, page 22.)
However, if PBX is set to OFF, you can't use the Speed Dial number that a Tel/R
keypress is programmed into.

Setting the Clock Change

You can easily let the machine's clock gain or lose one hour by using this feature.
1
Press Menu/Set, 1, 6. The screen displays
2
Press or
hour or Winter time to lose an hour, and press
Menu/Set.
3
Press 1 to change to Winter Time or Summer Time.
—OR—
Press 2 to exit without changing.

Turning Off the Scanner Lamp

The scanner lamp stays on for 16 hours before switching off to preserve the life of the lamp. You
can turn off the scanner lamp manually if you wish by pressing the
simultaneously. The scanner lamp will remain turned off until the next time you use the scanning
feature.
Turning off the scanner lamp will also reduce the power consumption.
Please note that turning the lamp off regularly will reduce the lamps life.
20
Chapter 1
to select ON (or OFF), and press Menu/Set when the screen displays your
to select Summer Time to gain an
TO SUMMER TIME ?
TO SUMMER TIME ?
1.CHANGE 2.QUIT
and keys