Connecting The Power Cord; Memory Storage - Brother MFC-590 Owner's Manual

Connecting the Power Cord

• This machine must be fitted with an earthed plug.
• Since the machine is earthed via the mains plug, you can protect yourself
from potentially hazardous electrical conditions on the telephone network
by keeping the power to the machine on when you connect it to a
telephone line. Similarly, you can protect yourself when you want to move
the machine, by disconnecting the telephone line first, and then the power
cord.
(For U.K.)
If you need to remove the moulded mains plug in order to fit an appropriate type,
you must discard the moulded plug immediately having cut it off, in order that it is
not inadvertently inserted into a live socket, thus presenting a shock hazard. The
wires in the mains lead of this appliance are coloured in accordance with the
following code.
• Green-and-yellow: Earth
• Blue: Neutral
• Brown: Live
As the wires in the mains lead of this apparatus may not correspond with the
coloured markings identifying the terminals in your plug, proceed as follows:
The wire which is coloured green-and-yellow must be connected to the terminal in
the plug which is marked by the letter "E" or by the safety earth symbol
coloured green or green-and-yellow.
The wire which is coloured blue must be connected to the terminal which is
marked with the letter "N" or coloured black.
The wire which is coloured brown must be connected to the terminal which is
marked with the letter "L" or coloured red.

Memory Storage

In the event of a power failure, all settings in the menus are stored permanently except for the settings
that are valid for the next fax only (e.g. conraast, overseas mode).
Multi-Line Connections (PABXs)
Most offices use a central telephone system, or PABX. The machine will work with most PABX or
key systems that allow a two-wire analogue connection. However, we recommend that you have a
separate telephone line for the machine. You can then leave the machine in Fax Only Mode to
receive faxes any time of day or night.
If you are installing the machine to work with a PABX:
1
It is not guaranteed that the unit will operate correctly under all circumstances with a PABX.
Any cases of difficulty should be reported first to the company that handles your PABX.
2
If all incoming calls will be answered by a switchboard operator, it is recommended that the
Receive Mode be set to MANUAL. All incoming calls should initially be regarded as telephone
calls.
3
The unit may be used with either pulse or tone dialling telephone service.
6
or