For Network Interface Cable Users; 10.2.4 Or Greater - Brother MFC-5440CN Quick Setup Manual

Step 2

For Network Interface Cable Users

For Mac OS
Make sure that you have completed the instructions from Step 1 "Setting Up
the Machine" on pages 2 - 6.
1
Turn off and unplug the machine from the
AC outlet and disconnect it from your
Macintosh
interface cable.
2
Turn on your Macintosh
3
Insert the supplied CD-ROM into your
CD-ROM drive.
4
Double-click the Start Here OSX icon to
install the printer driver and Remote Setup
program. If the language screen appears,
select your language.
5
Click MFL-Pro Suite to install.
6
Follow the on-screen instructions, and
restart your Macintosh
7
After the DeviceSelector window appears,
connect the Network interface cable to your
Macintosh
8
Connect the network interface cable to the
machine, and then connect it to a free port.
To connect the network interface cable to
the machine:
1. Open the scanner cover to its open
position.
2. Connect the network cable into the LAN
socket, marked with a
will find the LAN socket above and to the
left of the ink cartridge slots, as shown
below.
3. Carefully guide the network cable into the
trench as shown below, following the
trench round and toward the back of the
machine.
14
Installing the Driver & Software
®
X 10.2.4 or greater
®
if you already connected an
®
.
®
.
®
and then to the machine.
symbol. You
Warning
Ensure that the cable does not restrict the cover from
closing, or an error may occur.
In case of using both USB and LAN cables,
route both cables through the trench.
9
Lift the scanner cover to release the lock.
Gently push the scanner cover support
down and close the scanner cover.
0
Turn on the machine by plugging in the
power cord.
A
Select Applications from the Go menu.
B
Open the Utilities folder.
C
Open the Print Center icon.
D
Click Add.
E
Make the selection shown below.
F
Select Brother MFC-XXXX (XXXX is your
model name) (BRN_xxxxxx_P1), and then
click the Add button.
xxxxxx are the last six digits of the Ethernet
address.
Network User's Guide Chapter 5 on the
CD-ROM.
G
Select Quit Printer Setup Utility from the
Printer Setup Utility menu.
The setup is now complete.
Please see Network User's Guide Chapter 5
on the CD-ROM for more information about
connecting the MFC to a Macintosh
®
network.