Brother MFC-5440CN Quick Setup Manual page 13

A
The installation of the Brother drivers will
automatically start. The installation screens
appear one after another, please wait for a
while.
B
If the machine is configured for your
network, select the machine from the list,
and then click Next.
This window will not appear if there is only
one machine connected on the network, it
will be selected automatically.
If the machine is not yet configured for use
on your network, the Configure IP Address
window will appear. Enter the IP address
information appropriate to your network by
following the on-screen instructions.
C
When the Brother and ScanSoft on-line
Registration screen is displayed, make your
selection and follow the on-screen
instructions.
D
Click Finish to restart your computer.
E
After restarting the computer, the
Installation Diagnostics will run
automatically and the installation results
window will be shown.
For network installations the Repair MFL-Pro
Suite selection from the main menu is not
supported.
The MFL-Pro Suite, Brother Network
Printer driver, Network Scanner driver
and Network PhotoCapture Center
have been installed and the installation
is now complete.
™
11